{"(cut at 32 digits)":"（在32位數字處截斷）","{0} bytes over the limit. Cut at {1} bytes without breaking a character:":"超過限制{0}bytes。在不切斷字元的情況下，截斷至{1}bytes：","{0} of {1} per part":"每部分{0}/{1}","6to4":"6to4","Addresses":"位址","Also show base":"也顯示進位","Base {0}":"{0}進位","Base 36":"36進位","Binary":"二進位","Byte counter":"位元組計數器","Byte limit to check (UTF-8)":"要檢查的位元組限制（UTF-8）","Characters you see":"看到的字元","Code points":"程式碼點","Collapse repeated spaces":"合併重複空格","Compressed":"壓縮","Compression follows RFC 5952, the form to use in logs and documentation; address types follow the IANA special-purpose address registry.":"壓縮方式遵循RFC 5952，也就是記錄檔與文件中應使用的格式；位址類型則遵循IANA特殊用途位址登錄表。","Contains 4-byte characters such as emoji: MySQL needs the utf8mb4 character set to store them; its older utf8 (utf8mb3) set rejects them.":"包含表情符號等4位元組字元：MySQL需要使用utf8mb4字元集才能儲存這些字元；較舊的utf8（utf8mb3）字元集則不接受這些字元。","Decimal":"十進位","Deprecated (ORCHID)":"已棄用（ORCHID）","Digits in parentheses repeat forever: 0.1 in decimal is 0.0(0011) in binary, which is why 0.1 cannot be stored exactly in a binary floating-point number.":"括號中的數字會無限重複：十進位的0.1在二進位中是0.0(0011)，因此0.1無法精確儲存在二進位浮點數中。","Discard-only":"僅供捨棄","Documentation":"文件","Expanded":"展開","From base":"來源進位","Global unicast":"全球單播","grapheme clusters":"字素叢集","Group digits":"數字分組","Hexadecimal":"十六進位","IETF protocol assignments":"IETF通訊協定指派","IPv4 inside":"內嵌IPv4","IPv4-mapped address":"IPv4對映位址","IPv4/IPv6 translation (NAT64)":"IPv4/IPv6轉譯（NAT64）","IPv6 address":"IPv6位址","IPv6 tools":"IPv6工具","JavaScript length":"JavaScript長度","JavaScript, Java, Windows":"JavaScript、Java、Windows","Keep paragraphs":"保留段落","Link-local unicast":"鏈路本地單播","Local-use IPv4/IPv6 translation":"本地使用的IPv4/IPv6轉譯","Loopback":"迴路測試","Mode":"模式","Multicast":"多播","Network":"網路","Not a valid IPv6 address. Use eight groups of up to four hex digits separated by colons, with :: for one run of zero groups.":"不是有效的IPv6位址。請使用八組最多四位的十六進位數字，以冒號分隔；連續的零組可使用::表示。","Number":"數字","Number base converter":"數字進位轉換器","Octal":"八進位","One line":"單行","ORCHIDv2":"ORCHIDv2","Prefix length":"前置詞長度","Range":"範圍","Rejoin words broken with a hyphen":"重新接合以連字號分隔的單字","Remove line breaks":"移除換行","Remove without spaces":"移除換行且不加空格","Removing without spaces suits languages written without spaces, such as Chinese and Japanese. A hyphen is only removed when a lower-case letter ends one line and another starts the next, so a capitalised word such as a name keeps its hyphen.":"不加空格移除換行適合中文和日文等不使用空格書寫的語言。只有在某行以小寫字母結尾、下一行以另一個小寫字母開頭時，才會移除連字號，因此名稱等首字母大寫的單字會保留連字號。","Reserved by IETF":"IETF保留","Result":"結果","Reverse DNS name (PTR)":"反向DNS名稱（PTR）","Segment routing (SRv6) SIDs":"分段路由（SRv6）SID","SMS parts":"SMS部分","Teredo tunnelling":"Teredo通道","Text":"文字","These characters are outside the GSM alphabet, so the whole message is sent as UCS-2 with 70 characters per part: {0}":"這些字元不在GSM字母表中，因此整則訊息會以UCS-2傳送，每部分70個字元：{0}","Type":"類型","Unique local address":"唯一本地位址","Unspecified address":"未指定位址","Use only the digits of base {0} (0–9, then a–z for 10–35), with an optional minus sign and point.":"只能使用{0}進位的數字（0–9，10–35使用a–z），可選擇加入負號和小數點。","UTF-16 bytes":"UTF-16位元組","UTF-16 code units":"UTF-16程式碼單元","UTF-8 bytes":"UTF-8位元組","web pages, files, most databases":"網頁、檔案及大多數資料庫","what Python's len() counts":"Python的len()所計算的內容","Words and lines":"單字與行"}